Zamco X-ray – Technical Specifications

• Output rating Radiography kV range
• Radiography exposure time Radiography mode current Flouro mode timer (optional) Flouro mode current (optional) Flouro mode kV (optional)

Control Panel

MDX 500mA

• 40 kW (as per IS 7620-part1:1986) 40 – 125 kV
  (major – 10 kV/step)
  (minor – 1 kV/step)
• 0.01 – 5 sec (24 steps)
• 100, 200, 300, 400, 500 mA
• up to 5 minutes
• 0.1 – 3 mA
• 45 – 100 kV with 5 kV/step (12 steps)

Compatible Tube Stands

• Floor to Ceiling (FS)
• Floor to Ceiling with fluoroscopy (FSF)
• Floor to Ceiling with semi automatic Spot film device (FSSFD) Ceiling Free (CF)

Optional

• Second X-ray tube
• ImageIntensifier IITV system 9”with15”/17”dualmonitorsand32/100 frames image memory
• Vertical Bucky stand
• 30 / 50 KW X-ray tube for MDX 500 Flat Panel Detector (DR system)

Accessories

• Manual light beam collimator/motorized collimator (for fluoro applications) Hand switch with retractable cord
• Aluminum filter
• Foot Switch (for fluoro only)

Power Supply

• 440 Volts AC, ± 10% line regulation, Three Phase, 37.5/ 50# KVA, 50 Hz with line resistance of 0.2 Ohms (power lines having higher line resistance may limit the output of X-ray generator)
• 5 position Manual Tilt Table Horizontal Table with Floating Top Motor driven table

300mA

• 24 kW (as per IS 7620-part1:1986) 40 – 125 kV
  (major – 10 kV/step)
  (minor – 1 kV/step)
• Voltmeter to indicate input voltage: 0.02 – 10 sec (24 steps) 50, 100, 200, 300 mA up to 5 minutes
• mA meter to indicate tube current: 0.1 – 3 mA
• Digital display of mA, kV and mAs: 45 – 100 kV with 5 kV/step (12 steps)
• Voltage compensator for compensation of input voltage Tube overload protection circuit
• Major and minor kV selection switches for radiography Technic selection switch for tube current
• Time selection switch
• Bucky in / out selection switch

Space charge compensation

• Indicators for line ON, X-ray ON, overload and Bucky ON
• Switches for ready and X-ray ON
• Dual action hand switch on panel with retractable cord for radiation protection Spot filming at all mA stations (available in fluoroscopy / SFD applications)

Safety Features

• Automatic trip off overload circuit breaker
• O/L indicator provided. Electronic overload protection with simultaneous protection from high input voltage, kV, mA and time

Tube Head

• Rotating anode X-ray tube (dual focus) Focal Spot Small – 1.0 mm2 Large – 2.0 mm2